Personal Computer World 2009 February

home *** CD-ROM | disk | FTP | other *** search

/ Personal Computer World 2009 February / PCWFEB09.iso / Software / Linux / Kubuntu 8.10 / kubuntu-8.10-desktop-i386.iso / casper / filesystem.squashfs / usr / share / snmp / mib2c-data / mfd-readme.m2c < prev next >

Wrap

Text File | 2008-09-22 | 29.8 KB | 847 lines

######################################################################## ## generic include for XXX. Don't use directly. ## ## $Id: mfd-readme.m2c 12091 2005-04-18 22:05:47Z rstory $ ######################################################################## @if $m2c_mark_boundary == 1@ /** START code generated by $RCSfile$ $Revision: 12091 $ */ @end@ ######################################################################## ## @open ${name}-README-FIRST.txt@ ************************************************************************ ${name} README ------------------------------------------------------------------------ This document describes the results of the mib2c code generation system using the mfd code generation template. The resulting files are documented both in this README file as well as per-table specific README files. All of the files generated by this run of mib2c will begin with the ${name} prefix. Quick Start ----------- For those interested in a quick start, to get a pseudo-todo list, try this command in directory with the generated code: grep -n "TODO:" *.[ch] | sed 's/$[^ ]*$ $.*$TODO$.*$/\3 (\1)/' | sort -n Key: :o: Optional :r: Recommended :M: Mandatory :A: Advanced users This will give you and ordered list of places in the code that you may (or must) take a closer look at). You may also want to take a look at the on-line tutorial, found here: http://www.net-snmp.org/tutorial/tutorial-5/toolkit/mfd/index.html MIBs For Dummies Overview ------------------------- The MIBs For Dummies (MFD) configuration files have been written to help SNMP novices implement SNMP MIBs. This section will be a brief introduction to some of the general concepts you should be familar with. Managed Information Base (MIB) ------------------------------ A SNMP MIB (Managed information base) is a text file that describes the syntax for some set of data objects. The MIB creates a correlation between an ASCII name for an object and a number OID (Object Identifier). The SNMP protocol communicates information using the OIDs, and the MIB allows tools to display a name, which we humans find easier to deal with. To use an analogy, a MIB is much like a menu at a restaurant. If you've ever been to a reataurant and ordered a meal, and later received a bill that simply had '#6' on it, you get the idea. The name is easier for the customers to remember, and the waiters and chefs use the number for efficency. Scalars ------- A scalar variable is a unique object in a MIB which can represent a single value. For example, the SNMP standard MIB-II defines a variable, sysContact.0, which is a string containing the contact information for the person in charge of a particular agent. Note that scalar variable always end with '.0'. Rows and Tables --------------- When a group of related attributes occur more than once, they can be grouped together in a table. A table has an index, which uniquely identifies a particular row, and data columns, which contain the attributes for that row. For example, the SNMP standard MIB-II defines a table, ifTable, which contains information on the ethernet interfaces on a system. Data Structures --------------- The code generated by the MFD configuration files has a few important structures. The Data Context ---------------- The data context structure should contain the necessary information to provide the data for the columns in a given row. As long as you can extract the data for a column for the data context, the data context can be anything you want: a pointer to an existing structure, the parameters needed for a function call or an actual copy of the data. By default, a data context structure is generated with storage for all the data in a row. Information on changing the default is presented later on in this help. The MIB Context --------------- The MIB context structure is generated with storage for all the indexes of a table. This data will be used when searching for the correct row to process for a request. The Row Request Context ----------------------- Each table will have a unique data structure for holding data during the processing of a particular row. The row request context contains the registration context (that you supply during initilization), the data context, the MIB context, the undo context (for settable tables) and other data. There is also a netsnmp_data_list, which can be used to temporary storage during processing. The Table Registration Pointer ------------------------------ During initilization, you may provide a pointer to arbitrary data for you own use. This pointer will be saved in the row request context, and is passed as a parameter to several functions. It is not required, and is provided as a way for you to access table specific data in the generated code. These files are top-level files potentially useful for all the tables: ------------------------------------------------------------------------ File : ${name}_Makefile ---------------------------------------------------------------------- Purpose : Make file for compiling a (sub)agent. This file is only useful if you don't want to compile your code directly into the Net-SNMP master agent. Editable: Optional Usage : make -f ${name}_Makefile File : ${name}_subagent.c ---------------------------------------------------------------------- Purpose : This file contains a main() function for an agent or sub-agent and is compiled using the Makefile above. Table specific README files ------------------------------------------------------------------------ Each table for which code was generated has its own README file describing the files specifically associated with each table. You should probably read these next: @foreach $table table@ @ include m2c_setup_table.m2i@ ${name}-README-${table}.txt @end@ These are miscellaneous auto-generated code files you generally shouldn't edit. They contain code that ties your code together with the Net-SNMP agent. ------------------------------------------------------------------------ @if $m2c_create_fewer_files == 1@ File : ${name}.c Purpose : Initilization for the entire module set, including the SNMP tables. @end@ File : ${name}.h Purpose : Header file for the module set. Includes config_require macros to auto-load the other code pieces when compiled into the agent. @if $m2c_create_fewer_files != 1@ File : ${name}_oids.h Purpose : C #define definitions of the tables, columns, and OIDs File : ${name}_enums.h Purpose : C #define definitions of the enumerated type values for each column of each table that requires them. @else@ File : ${name}_constants.h Purpose : C #define definitions of the tables, columns, OIDs, enumerated type values for each column of each table that requires them. @end@ File : ${name}_interface.c Purpose : MFD interface to Net-SNMP. This auto-generated code ties the functions you will fill out to the code that the agent needs. ######################################################################## @foreach $table table@ @ include m2c_setup_table.m2i@ @ open ${name}-README-${table}.txt@ ************************************************************************ ${context} README ------------------------------------------------------------------------ This readme file describes the code generated by mib2c (using the MIBs for Dummies (MFD) configuration file). The code generated was generated specifically for the following SNMP table: ${context} Your code will be called when the snmp agent receives requests for the ${context} table. The agent will start by looking for the right row in your existing data to operate on, if one exists. Configuration Variables ------------------------------------------------------------ Some variables used for code generation may be set to affect the code generation. You may override these variables by setting them in the file ${m2c_defaults_dir}table-${context}.m2d, and then re-running mib2c. m2c_table_settable (currently '$m2c_table_settable') -------------------------------------------------------- This variable determines whether or not code is generated to support MIB object which have an access of read-write or read-create. The default is set based on whether or not the table contains writable objects, but can be over-ridden. Syntax: @eval $@m2c_table_settable = 0@ m2c_table_dependencies (currently '$m2c_table_dependencies') -------------------------------------------------------- This variable determines whether or not code is generated to support checking dependencies between columns, rows or tables. The default is set based on whether or not the table contains writable objects, but can be over-ridden. Syntax: @eval $@m2c_table_dependencies = 0@ m2c_table_row_creation (currently '$m2c_table_row_creation') -------------------------------------------------------- This variable determines whether or not code is generated to support checking creation of new rows via SNMP. The default is set based on whether or not the table contains read-create objects, but can be over-ridden. Syntax: @eval $@m2c_table_row_creation = 0@ m2c_context_reg (currently '$m2c_context_reg') -------------------------------------------------------- This variable contains the structure name to typedef for the ${context}_registration. During initilization, you will provide a pointer to a structure of this type. This pointer is used as a parameter to many functions so that you have access to your registration data. The default is a netsnmp_data_list pointer, which will allow you to keep multiple pointers tagged by a text name. If you have a new or existing structure you would rather use, you can redefine this variable. To avoid regenerating code, you may also change this typedef directly in the ${table}.h header. Syntax: @eval $@m2c_context_reg = "struct my_registration_context@ m2c_data_context (currently '$m2c_data_context') -------------------------------------------------------- This variable contains the structure name to typedef for the ${context}_data. This typedef is used in the row request context structure for the table, ${context}_rowreq_ctx. The typedef in the primary table context will be used for the data and undo structure types. This structure should contain all the data needed for all the columns in the table. The default is 'generated', which will cuase a new data strcuture to be generated with data members for each column. To avoid regenerating code, you may also change this typedef directly in the ${table}.h header. Syntax: @eval $@m2c_data_context = "struct my_data_context"@ m2c_data_allocate (currently '$m2c_data_allocate') -------------------------------------------------------- This variable determines whether or not the data context (see above) requires memory to be allocated. The default generated data structure does not. If you are using a custom data context which needs to allocate memory, override this value and two additional functions will be generated: ${context}_allocate_data ${context}_release_data Syntax: @eval $@m2c_data_allocate = 1@ m2c_data_init (currently '$m2c_data_init') -------------------------------------------------------- This variable determines whether or not the data context (see above) or any other items you have added to the table context requires initialization. The default generated data structure does not. If you are using a custom data context or have added items needing initialization to the table context, override this value and two additional functions will be generated: ${context}_rowreq_ctx_init ${context}_rowreq_ctx_cleanup Syntax: @eval $m2c_data_init = 1@ m2c_table_access (currently '$m2c_table_access') ------------------------------------------------------------------ This variable determines which data interface will be use to generate code for looking up data for a given index. The default is the 'container-cached' access code, which caches the data in a netsnmp- container (usually a sorted array). Available options can be determined by checking for mib2c configuration files that begin with 'mfd-access-*'. Syntax: @eval $@m2c_table_access = '$m2c_table_access'@ m2c_include_examples (currently '$m2c_include_examples') ------------------------------------------------------------------ This variable determines whether or not to generate example code. The default is to generate example code. Syntax: @eval $@m2c_include_examples = 0@ m2c_data_transient (currently '$m2c_data_transient') ------------------------------------------------------------------ This variable determines how the generated example code deals with the data during data lookup. See the table readme file for details on how the current table access method interprets this value. In general, a value of 0 indicates persistent data, 1 indicates semi-transient and 2 indicates transient data. Syntax: @eval $@m2c_data_transient = 0@ Index(es) for the ${context} table ------------------------------------------------------------ The index(es) for the ${context} table are: @foreach $node index@ @ include m2c_setup_node.m2i@ $node: Syntax: $node.syntax DataType: $node.perltype ASN type: $node.type C-code type: $m2c_decl @end@ # foreach You should know how to set all these values from your data context, ${context}_data. ************************************************************************ ${context} File Overview ------------------------------------------------------------------------ Several files have been generated to implement the ${context} table. We'll go through these files, one by one, explaining each and letting you know which you need to edit. File: ${name}_data_access.[c|h] ------------------------------------------------------------------------ The ${name}_data_access file contains the interface to your data in its raw format. These functions are used to build the row cache or locate the row (depending on the table access method). Set MIB context ----------------- TODO : Set MIB index values FUNC : ${context}_indexes_set WHERE: ${context}_data_access.c This is a convenience function for setting the index context from the native C data. Where necessary, value mapping should be done. @if $mfd_readme_verbose == 1@ This function should update the table index values (found in tbl_idx) for the given raw data. @end@ @ eval $m2c_processing_type = 'r'@ @ include mfd-access-${m2c_table_access}-defines.m2i@ @if $m2c_create_fewer_files != 1@ File: ${name}_enums.h @else@ File: ${name}_constants.h @end@ ------------------------------------------------------------------------ This file contains macros for mapping enumeration values when the enumerated values defined by the MIB do not match the values used internally. Review this file to see if any values need to be updated. @if $m2c_create_fewer_files != 1@ File: ${name}_data_get.c @else@ File: ${name}.c; GET support @end@ ------------------------------------------------------------------------ @ if ("$m2c_data_allocate" eq "yes") && ("$m2c_data_context" ne "generated")@ Allocate data context --------------------- TODO : allocate memory for a data context FUNC : ${context}_allocate_data This function will be called to allocate memory for a data context when a new row request context is being created, or to create an undo context while processing a set request. Release data context ------- TODO : release memory allocated for a data context FUNC : ${context}_release_data This function will be called to release any resources held by a data or undo context. It will be called when a row request context is released, or during cleanup after a set request. @ end@ @ foreach $node index@ @ include m2c_setup_node.m2i@ @ if ($m2c_skip_mapping != 1)@ Map native data to MIB format ----------------------------- TODO : convert data from its native format to the format required by the MIB FUNC : ${node}_map This function should map between the native format of the node data to the format or values required by the MIB. For example, a C boolean value for a MIB node with the TruthValue syntax needs to map the value C false(0) to TruthValue false(2). @ end@ #// skip mapping @ end@ // foreach index @ foreach $node nonindex@ @ include m2c_setup_node.m2i@ @ if ($m2c_skip_mapping != 1)@ Map native data to MIB format ----------------------------- TODO : convert data from its native format to the format required by the MIB FUNC : ${node}_map This function should map between the native format of the node data to the format or values required by the MIB. For example, a C boolean value for a MIB node with the TruthValue syntax needs to map the value C false(0) to TruthValue false(2). @ end@ #// skip mapping Get data for column ------------------- TODO : retrieve column data from raw data FUNC : ${node}_get @ ifconf syntax-$node.syntax-readme.m2i@ @ include syntax-$node.syntax-readme.m2i@ @ elsif ($node.enums == 1) && ("$node.perltype" eq "BITS")@ Since this column has enumerated BITS, you should update or replace the IS_SET_* macros to properly determine whether or not a particular bit should be set. @ end@ @ end@ @if $m2c_create_fewer_files != 1@ File: ${name}_data_set.c @else@ File: ${name}.c; SET support @end@ ------------------------------------------------------------------------ @if $m2c_table_settable == 0@ This table does not support set requests. @else@ This code was generated based on the following assumptions or settings: @ if $m2c_table_dependencies == 1@ 1) None of the values for this table have DEPENDENCIES on other objects. @ else@ 1) Some of the values for this table have DEPENDENCIES on other objects. @ end@ @ if $mfd_readme_verbose != 0@ DEPENDENCIES on other objects complicates SET request processing. When one or more columns in a table depend on another object (in the same table, or in another table), a DEPENDENCY exists. For example, if you have a table that determine a color with three columns (red, green and blue) that define the percentage of each primary color, the total for the three columns must equal 100 percent. So, in addition to checking that each colums has a valid value between 0 and 100, the total of all three columns must equal 100. Set $@m2c_table_dependencies = 0 in ${m2c_defaults_dir}table-${table}.m2d and regenerate code if this assumption is incorrect. @ end@ @if $m2c_table_row_creation == 1@ 2) This table supports ROW CREATION. @else@ 2) This table does not support ROW CREATION. @end@ @if $mfd_readme_verbose != 0@ Supporting ROW CREATION allows new rows to be created via SNMP requests. @end@ @if $m2c_table_row_creation == 1@ To support row creation, the index component of an incoming set request must be validated. A funciton is generated for each individual index component, and another for validating all the index components together. @ foreach $node externalindex@ @ include m2c_setup_node.m2i@ Validate external index ----------------------- TODO : validate the specified external index component FUNC : ${context}_${node}_check_index @ end@ # foreach externalindex @ foreach $node internalindex@ @ include m2c_setup_node.m2i@ Validate index component ------------------------ TODO : validate the specified index component FUNC : ${node}_check_index @ end@ Validate index -------------- TODO : check that all index components are valid FUNC : ${context}_validate_index @end@ @ if $m2c_table_dependencies == 1@ Check dependencies ------------------ TODO : check that all dependencies have been satisfied FUNC : ${context}_check_dependencies This function will be called after all the individual columns have been set to their new values. Check for any dependencies between rows or tables in this function. @ end@ Undo setup ---------- TODO : save data for undo FUNC : ${context}_undo_setup This function will be called before the individual undo_setup functions are called. This is where you should save any undo information which is not directly related to a particular column. This function will only be called once per row. After this function is called, any column which is being set will have its individual node undo_setup function called. @ foreach $node nonindex@ @ include m2c_setup_node.m2i@ @ if $node.settable == 0@ @ next@ # skip to next column @ end@ Check value for column ---------------------- TODO : perform additional validations on values for a set request FUNC : ${node}_check_value The generated code will automatically validate incoming requests against all the requirements specified by the syntax of the MIB. However, it is often the case that additional requirements are specified in the description of a MIB object. Those type of validations should be checked in this function. Undo setup for column --------------------- TODO : save the value for column FUNC : ${node}_undo_setup After the table level undo setup function has been called, the individual node undo setup functions will be called for columns which are being set. Set value for column -------------------- TODO : set the value for column FUNC : ${node}_set After all the validations have been passed, this function will be called to set the new value. Undo value for column --------------------- TODO : undo set for column FUNC : ${node}_undo If an error occurs after a column has been set, this function will be called to undo the set and restore the previous state. @ end@ # nonindex Commit changes -------------- TODO : commit changes FUNC : ${context}_commit After all values have been set, the commit function will be called. @ if $m2c_irreversible_commit == 1@ Commit irreversible changes --------------------------- FUNC: ${context}_irreversible_commit This special mode is reserved for committing changes which can not be undone. (e.g. launching a rocket). It is called after all normal commits have succeeded. @ end@ @end@ # settable ************************************************************************ ${context} Reference ------------------------------------------------------------------------ Function flow ---------------------------------------------------- To give you the general idea of how the functions flow works, this example flow is from a complete table implementation. NOTE: Depending on your configuration, some of the functions used in the examples below may not have been generated for the ${context} table. Conversely, the examples below may not include some functions that were generated for the ${context} table. To watch the flow of the ${context} table, use the following debug tokens: snmp_agent helper:table:req ${context} verbose:${context} internal:${context} e.g. snmpd -f -Le -D${context},verbose:${context},internal:${context} @if $m2c_create_fewer_files == 1@ @ eval $tmp_mfd_rm_set = "xxx.c"@ @ eval $tmp_mfd_rm_get = "xxx.c"@ @else@ @ eval $tmp_mfd_rm_set = "xxx_data_set.c"@ @ eval $tmp_mfd_rm_get = "xxx_data_get.c"@ @end@ Initialization -------------------------------- init_xxxTable: called xxx.c initialize_table_xxxTable xxx.c _xxxTable_initialize_interface xxx_interface.c xxxTable_init_data xxx_data_access.c _xxxTable_container_init xxx_interface.c xxxTable_container_init xxx_data_access.c GET Request -------------------------------- _cache_load xxx_interface.c xxxTable_cache_load xxx_data_access.c xxxTable_allocate_rowreq_ctx xxx_interface.c xxxTable_allocate_data $tmp_mfd_rm_get xxxTable_rowreq_ctx_init $tmp_mfd_rm_get xxxTable_indexes_set $tmp_mfd_rm_get xxxTable_indexes_set_tbl_idx $tmp_mfd_rm_get xxxTable_pre_request _mfd_xxxTable_object_lookup xxx_interface.c xxxTable_row_prep xxx_data_access.c _mfd_xxxTable_get_values xxx_interface.c _mfd_xxxTable_get_column xxx_interface.c yyy_get $tmp_mfd_rm_get xxxTable_post_request GETNEXT Request -------------------------------- _cache_load ... xxxTable_pre_request ... _mfd_xxxTable_object_lookup ... _mfd_xxxTable_get_values ... xxxTable_post_request ... SET Request: success -------------------------------- _cache_load ... xxxTable_pre_request _mfd_xxxTable_object_lookup ... _mfd_xxxTable_check_objects xxx_interface.c _xxxTable_check_column xxx_interface.c yyy_check_value $tmp_mfd_rm_set _mfd_xxxTable_undo_setup xxx_interface.c xxxTable_allocate_data ... xxxTable_undo_setup xxx_interface.c _xxxTable_undo_setup_column xxx_interface.c yyy_undo_setup $tmp_mfd_rm_set _mfd_xxxTable_set_values xxx_interface.c _xxxTable_set_column xxx_interface.c yyy_set $tmp_mfd_rm_set _mfd_xxxTable_check_dependencies xxx_interface.c xxxTable_check_dependencies $tmp_mfd_rm_set _mfd_xxxTable_commit xxx_interface.c xxxTable_commit $tmp_mfd_rm_set _mfd_xxxTable_undo_cleanup xxx_interface.c xxxTable_undo_cleanup $tmp_mfd_rm_set xxxTable_release_data ... xxxTable_post_request ... SET Request: row creation -------------------------------- _cache_load ... xxxTable_pre_request _mfd_xxxTable_object_lookup ... xxxTable_index_from_oid xxx_interface.c xxxTable_allocate_rowreq_ctx ... ... _xxxTable_check_indexes xxx_interface.c yyy_check_index $tmp_mfd_rm_set xxxTable_validate_index $tmp_mfd_rm_set _mfd_xxxTable_check_objects ... _xxxTable_check_column ... yyy_check_value ... _xxxTable_check_column ... yyy_check_value ... _mfd_xxxTable_undo_setup ... _mfd_xxxTable_set_values ... _mfd_xxxTable_check_dependencies ... _mfd_xxxTable_commit ... _mfd_xxxTable_undo_cleanup ... xxxTable_post_request ... SET Resuest: value error -------------------------------- _cache_load ... xxxTable_pre_request ... _mfd_xxxTable_object_lookup ... _mfd_xxxTable_check_objects ... _xxxTable_check_column ... yyy_check_value ... ERROR:"yyy value not supported" xxxTable_post_request ... SET Request: commit failure -------------------------------- _cache_load ... xxxTable_pre_request ... _mfd_xxxTable_object_lookup ... _mfd_xxxTable_check_objects ... _mfd_xxxTable_undo_setup ... _mfd_xxxTable_set_values ... _mfd_xxxTable_check_dependencies ... _mfd_xxxTable_commit ... xxxTable_commit ... ERROR: bad rc -1 _mfd_xxxTable_undo_commit xxx_interface.c xxxTable_undo_commit $tmp_mfd_rm_set _mfd_xxxTable_undo_values xxx_interface.c _xxxTable_undo_column xxx_interface.c yyy_undo $tmp_mfd_rm_set _mfd_xxxTable_undo_cleanup ... xxxTable_post_request ... Row release (user initiated) -------------------------------- xxxTable_release_rowreq_ctx xxx_interface.c xxxTable_rowreq_ctx_cleanup $tmp_mfd_rm_get xxxTable_release_data $tmp_mfd_rm_get Table / column details ---------------------------------------------------- @ include details-table.m2i@ @ foreach $node column@ @ include m2c_setup_node.m2i@ @ include details-node.m2i@ @ end@ @end@ # foreach table ## ######################################################################## @if $m2c_mark_boundary == 1@ /** END code generated by $RCSfile$ $Revision: 12091 $ */ @end@